Month: July 2019

In the event that you’ve recently spent a fortune installing new carpet in your home or office, you have to analyze a couple points of interest to ensure your handyman did the job right. Carpet installation can be a dubious strategy, particularly on staircases and in rooms where the carpet flooring Arizona moves to another ground surface material like hardwood or tile.

[Tweet “It may be best to put on a speculative trench coat and get a larger than usual magnifying glass to examine whether the carpet installation phoenix is introduced well or whether you have to begin a carpet examination.”]

Wrinkles or Folds:

Inspect the surface of the carpet for wrinkles or folds that cause the carpet to look distorted or rippled. On the off chance that carpet installation phoenix hasn’t sufficiently pulled and extended the carpet flooring Arizona over the carpet tacks, the surface will crease. Step delicately on the wrinkle to check whether it quickly vanishes. In the event that it does, there may have been a little wrinkle in the cushioning that is no more a problem. On the off chance that it doesn’t vanish instantly, the carpet wasn’t installed well.

Seams as Border/Walls:

Review the seams where the carpet meets the walls, baseboards, entryways or different sorts of flooring. In the event that you see frayed or loose edges that aren’t flawlessly tucked under the wall, floorboards or transitional carpet strips, the carpet isn’t installed well according to phoenix carpet stores. Carpet installers frequently secure edges with extra tacks, carpet tape, move strips or cements to lessen the probability of carpet isolating from the wall or disentangling at the corners. Contact the installer to repair any unattractive seams.

Unleveled Carpet Surface:

Lie on your stomach and view the carpet from the side. Reposition your body to look at the carpet in another heading. On the off chance that you don’t see dips, buckles or divots in the surface of the carpet, your carpet installation was done nicely, suggests phoenix carpet stores. A carpeted surface ought to be smooth and level. On the off chance that you see troublesome areas, the cushioning underneath the carpet may have clasped. It’s likewise conceivable that you have a twisted or harmed subfloor that isn’t the installer’s flaw. Be that as it may, the installer ought to have told you of critical irregularities in the subflooring before installing the carpet.

Stair liners:

Carpet is glued to the edge of the stair to guarantee it is fixed in place. Inspect the opposite side of the stairs, the uncovered side that ordinarily supports the stair railing. Ensure the carpet wraps safely around the handrail and rails without any gaps or loose ends. In the event that the side appears to be like the closures of a conveniently wrapped present, the carpet is installed properly.

The post How Do You Know If Your Carpet is Getting Installed Properly appeared first on Express Flooring.

Flooring is an essential part of the house. Choosing the perfect flooring for your house takes a lot of time given the number of varieties available in the market. Most of these flooring are easy to maintain but you need to clean them nonetheless to make them look new always.

All the floorings are required to be cleaned in a different way. For some floorings are easier to clean while others are not. In order to ensure your flooring makes your house look better, you need to maintain it from time to time. Here are a few tips using which you can clean your flooring without much hassle.

How to clean Ceramic or Porcelain Floor

Ceramic or Porcelain tiles are the easiest to clean and maintain. If something has spilled over the floor or there is a stain, then all you need to do is wipe it using a wet mop. You can use a neutral floor cleaner once a while for cleaning the floor. All sorts of mops work great but the best mop is the good old string mop. One needs to ensure that the grout lines between the flooring are also cleaned properly and nothing is stuck between them to make your flooring look new as ever. Also, make sure not to use abrasive cleaner on the floor otherwise it will scratch the glaze.

How to clean Vinyl Floor

Vinyl flooring is available in a lot of varieties these days. The most popular amongst it is the vinyl planks and vinyl tiles. These flooring as very easy to maintain and clean and do not take much time also. If you have spilled something on the floor, then you can clean it using a wet mop just like for ceramic or porcelain flooring. Even while washing the floor, make sure that you use a neutral floor cleaner and not an abrasive one to ensure that the flooring does not get spoiled. If after moping you can see streaks on the floor, mop it again using a solution of white vinegar and water. Do not pour water directly over the floor or it will loosen the adhesive and increase the chances of floor damage.

How to clean Wooden Floor

Hardwood flooring is not as easy to maintain as other types of flooring options but if cleaned regularly, no damage will be done to the flooring and it can remain new for a really long time. If you want your floor to shine to give it a polished look for a long time, just vacuum your floor and then apply liquid floor cleaner over it using a dry wax applicator. This will keep your floor new as ever for a long time.

Make sure to clean you flooring properly to intact the beauty of your house.

The post How to Clean Different Types of Flooring appeared first on Express Flooring.

It is imperative that we have perfectly laid floors and perfectly done walls. there are a lot of things you need professional assistance for and luckily enough vinyl installation Arizona is not one of them. When choosing flooring and there are many vinyl flooring options that you can go through before you make a final decision. Once you have gone through all vinyl flooring options and selected the one that suits you best then the next question you arrive at is just as crucial as selecting the flooring is, laying. There are a lot of people who will do the job of vinyl installation Arizona for you. But if you have decided to get involved and do it yourself here are a few tips that might be able to help you with that. Sheet vinyl flooring needs a few things to be checked, like first off you need to lay the floor in position. When working with Sheet vinyl flooring you will be able to see how easy it is to do this job yourself. The next thing you need to do is fold the sheet of flooring and remember that even the best quality sheets are not extremely flexible so do not over bend to avoid any cracks or breaking.

If you have looked at vinyl flooring options, you would have gone through a whole lot of options before you decided on the one. Be sure to choose a vinyl sheet that is premium in quality and also that your sales guy is giving you a warranty and a guarantee period.

While getting Sheet vinyl flooring get a template of the room that you will be installing it in. This way you will have precise measurements to work with which implies lesser room for error.

Another important tip to remember while doing vinyl installation Arizona, is to prepare the subfloor. Make sure that it is completely leveled and free of any things that may be a potential hindrance in the perfection of the laying.

A lot of people complain of chipping or tearing after vinyl installation Arizona. To avoid that put the sheets in the room and leave them for 48-72 hours, this way it will absorb the natural moisture of the room and the likelihood that might tear off or peel is low.

Another major win for Sheet vinyl flooring is that most of them come with the adhesive pre applied to the back. That way it becomes very easy to apply it all you need to do it cut the sheets in measurements that suit the room that you want it in.

Wait several hours before restoring the molding and trims. You do not want you hard work to go it vain, so let it dry off perfectly.

If you follow the instructions on the package and also kept these tips in mind vinyl installation Phoenix can be done with great ease.

The post How to Install a Sheet Vinyl Floor – Tips appeared first on Express Flooring.

It is a very tedious job to refinish a wooden floor. The first and foremost aspect one has to figure out is what kind of wood is used, is it oak maple or heart pine? When compared heart pine and maple are harder to refinish than oak. Floors that are made of engineered wood cannot be refinished, as they have a thin layer of veneer on the top and when we try to sand it, it will come right off.

A minimum 1/8 inch of wood should remain above the tongue for the floor to be refinished. If your floor is in good condition then you can refinish and make it a beautiful floor to be able to walk on.

Things you will need to refinish a hardwood floor:

• Mainly you will need to rent a drum sander or a belt sander. It is wiser to choose a belt sander as it is easy to control and you can change the belts easily as well. The problem with a drum sander is, if you don’t keep it moving it can make grooves on your floor that cannot be repaired. Moreover the drum sander is heavier.
• You will need an edge sander. This will make it easy to sand the edges and the corners of a room.
• Buffer
• Orbital/palm sander
• Vacuum
• Tack cloths
• Dust masks
• To protect ears
• Goggles
• Knife or scraper
• Natural bristle brush/foam applicators

Refinishing hardwood floors is a 6 step process:

Preparation: Remove everything from the room. Pull out the staples and nails that have been used to put down a carpet/ plywood. Sweep the floor thoroughly and dust mop. Keep the floor as clean as possible.

Before you begin, do a walk through and carefully inspect that there are no loose boards or anything that needs repair.

1st sanding: Sanding a floor tends to raise a lot of dust. Make sure to cover everything like vents and doorways with plastic to keep the dust to get into them. Be sure to wear the safety gear, as sanders can get very loud. It is common for a nail or splinter to fly up on to your face when using a sander. Fit your sander with a course grit paper (20-36). Try an area that is less visible, to get a hang of it. Start the sander away from the floor and then slowly lower it onto the ground.

Be very careful as it is very easy for the sander to make a swirl mark or scratch the floor. Sand from wall to wall forward and backward along the grain for each row. First sanding removes the finish that was previously on it but does not resurface the wood floor. Make sure to check the sanding belt and change if needed. You can only remove up to 85% of the finish in the first step. Once you are done with the main part of the room, sand the edges using the edge sander. Sand the part next to the baseboard and work towards the area that just completed. Semi circular motion from left to right should be used.

2nd sanding: Sanding for the second time basically removes any scratches made by the previous sanding and removes any leftover finish and marks. Use an 80 grit paper and repeat what you did previously. The only thing is, start from the opposite end of the room. Once the floor is completely sanded, use the edge sander again with an 80 grit paper to sand the edges of the room. After this is done, the floor should look like planks that are freshly milled.

Final sanding: Install a 100 grit paper and begin sanding your room from the same place that you started the first sanding. This final sanding is to remove all the scratches left from the previous sanding. Sand up to the base boards and then blend the edges into the main floor.

Buffing: After you are done with the sanding, the next step is to buff your floor. Use a 100 grit sand screen on a buffer. Moving the buffer back and forth will help even out the scratches. Make sure not to hurry this step. Never leave the buffer in one place for too long as it can cause scratches. Use a random orbit sander with a 100 grit paper to finish up the buffing. Lastly the baseboards need to be sanded to blend it with the main floor.

Apply the finish: Firstly you have to decide what kind of a finish you are looking for. Two types of finishes available, water based or oil based. Using these you can either have a gloss, semi gloss or a satin finish. Mostly satin finish is preferred as it is good at hiding imperfections on the floor. If you are looking for a traditional look with a glow then oil based finish is the way to go but the only issue is the fumes are very toxic and you have to be sure you ventilate the room well. On the other hand the water based polyurethane will dry clear and doesn’t give a yellowish look for your floor.

Another kind of finish is the OSMO hard wax oil, it is an Eco-friendly option that resists humidity and can be used in bathrooms and kitchens. It is considered to be safe to use in children’s bedroom and there furniture.

Once the decision is made, use the natural bristle brush or a foam applicator to cut in along the edges and corners. Make sure the layers are not too thick and it doesn’t drip. Apply a thin even coat. Start applying from the inside of the room to the outside, so that you don’t get stuck inside. When the finish is still wet, blend in the brush marks with a foam applicator or a lamb’s wool. Be sure you give it 24 hours to dry. Before you start the last coat, use a soft damp cloth and drag it along the floor to clean out any dust particles. After the last coat is completed give it 24 hours to a week if possible for it to dry out completely. Do not mop the floor for at least a couple of weeks.

The post Step By Step Guide to Refinishing Wood Floors appeared first on Express Flooring.

Commercial flooring options are many, but there is nothing like carpet tiles. Commercial Carpet tiles have come about recently, leaving behind traditional carpet with their usefulness and handiness. Carpet tile installation is way easier than installing traditional carpet. Hence it is preferred in commercial and even domestic spaces. There are a few guidelines that one must follow while installing commercial carpet tiles. Money can be saved by not hiring professional services for installation. The process is easy but requires precision in order to have a perfect and beautiful floor. The following is a guide on how to install commercial carpet tiles.

Commercial Carpet Installation Guide:

While buying the tiles make sure that are of the color and shade that you want and all the tiles are uniform. It is necessary that the carpet tiles are kept in the room’s temperature so that they acclimatize to it. The humidity must never fall below 30% as this can cause gaping between the tiles. Carpet tiles can be installed over any surface that is wax free such as laminate, vinyl or even hardwood. If it is a concrete floor, make sure the surface is sealed properly. The surface must be cleaned thoroughly. Get rid of every speck of dust and dirt for a firm carpet installation. Remove any blotches or stains with a damp cloth. Allow the surface to dry thoroughly before you begin your procedure.

When you start, decide on a pattern. You can either have straight or Checker board. For a checker board pattern, you have to turn every alternate tile 90 degrees. Measure the length of each side of the wall and divide each by 2. This will give you the mid-point on each wall. Take a tile, measure its length and find the mid-point of the tile too. Place the tile near the wall in such a way that the midpoint of the wall lies exactly where the mid-point of the tile is. Mark the two ends of the tile that touch the wall. Repeat this process for the all walls. Now draw lines from one wall to the opposite where you had marked the ends of the tile. You should have two parallel lines running across the room between two walls. You will end up with a cross hair.

Place a tile at the centre, where all the lines meet and form a space for the tile. This will be your starting point from where you can start laying your tiles. Place the first row of tiles without adhesive so that you can adjust the ends of the tiles. The last tile that meets the wall must be of the same length as the one on the opposite wall. Make adjustments accordingly.

If the tiles have an adhesive backing then go ahead and peel and stick. Else you could apply adhesive to a portion of the floor with a roller and stick the tiles carefully on it. It is advised to lay tiles in one quadrant first so that it is easier to move. To work around doors, vents or irregular corners you can use a utility knife and a carpenter’s square to cute the tile accordingly. Once you are done with the entire floor, use a dry roller to roll over the floor and make sure all seams are perfect. Get rid of excessive glue with a damp cloth and allow the floor to dry.

Allow the floor to rest for 5-7 days before allowing traffic on it. Enjoy your newly installed commercial carpet floor!

The post How to Install Commercial Carpet Tiles appeared first on Express Flooring.

Click lock floor is basically a type of floating floor, which is made of planks that join together near the sides and gets locked. For the click lock flooring, no nails or glue is used. Planks interconnect when one plank is angled and then laid down next to the other plank. Click lock flooring requires gap of ¼ in around the edge of the room. If the gap is not provided then expanding and contracting can cause damage to the floor boards.

As there are no nails or glue involved, the best way to fix a plank that is damaged is to unclick it, remove it and place the new board in its place.

You will need:

• A pry bar.
• A circular saw.
  
  

Here you can find the step by step process on how to repair the click lock floor.

Step 1: First and foremost, locate the area where the boards are damaged. Next find the wall that is parallel to the direction of the boards. Now you will need to remove the boards from that wall to the area where it is damaged to replace with new boards.

Step 2: With the help of a pry bar remove the baseboard from the wall that is near the area of repair and put it aside. As the boards have to be removed, first remove the baseboard that is concealing the edge of the flooring. After you finish with the new boards you can reinstall that baseboard again.

Step 3: Next you will have to examine the area where the planks meet the wall. Try to get a hold of the edge of the planks with your fingers, if there is not enough place for your fingers, you can try to place the edge of the pry bar into the gap.

Step 4: Now lift the plank that is closest to the wall, this will help the plank slide down to the floor at an angle and it will help to disengage the lock on the floor. To remove the planks slide it backwards. Continue doing this till you get to the damaged area. Once removed discard the damaged boards.

Step 5: Replace all the boards that are damaged with new ones leading back to the wall. Hold the board at an angle and 5-6 inches above the ground level, so that the edges of the two boards meet. Before lowering the planks to the ground push the two boards together till they lock. Repeat this process till you reach the wall.

Step 6: Before you finish, make sure you leave a gap of ¼ inch in between of the wall and the last plank. In case, the last board is too big and is not allowing a gap use a circular saw and cut the plank to the appropriate width needed and then install.

Step 7: The baseboard that you removed in step 1 can be replaced now to cover the gap.

Phoenix Hardwood Flooring

Hardwood Installation Tucson

The post How to Repair Click-Lock Flooring [Quick Guide] appeared first on Express Flooring.

Vinyl is a synthetic material made of polyvinyl chloride and a plasticizer agent. Vinyl is one of the long- lasting, attractive, versatile flooring options available in today’s market. It comes in various colors, textures, patterns and standards that offer practicality and suppleness to install in any area of your home. Vinyl is a very convenient flooring option for both residential and commercial purpose as it gives comfort and ease to walk underfoot. It can withstand a lot of wear and tear in high traffic areas. It gives an artistic beauty to your home and is incredibly economical choice for the people who are on a budget. However, maintaining vinyl flooring is not so simple, you should be very careful to keep your vinyl floors realistic and beautiful for the years of existence.

To keep the lasting shine and fresh feel of your investment for as long as possible, we suggest you to follow these instructions-vinyl flooring

1. Vacuum or sweep your floors frequently to remove dirt, sand, and other particles that step in with foot wear and pets dander etc, also, make sure you are alert to soggy substances and other sticky stains to act immediately as you notice, this is to prevent from permanent staining on your vinyl floors.
2. Protect your flooring from sun exposure as it ruins the span of your vinyl flooring. Because constant exposure of sunlight can cause vinyl to fade over time.
3. Use natural weave doormats or rugs on your vinyl floors to keep away from debris and dust into your home. Avoid using mats or rugs that are backed with latex or rubber that could cause permanent damage to flooring.
4. Use floor protectors under furniture legs to prevent vinyl from scratching and scuffing. Placing heavy objects directly on vinyl flooring may cause the floor to crack or damaged.

Don’ts for better care of your vinyl floors-

Vinyl –needs a regular cleaning for better maintenance and ambiance.

• Do not use wax or solvent-based polishes on your flooring that may result in damage and could ruin the span of vinyl.
• Do not use abrasive/ harsh cleaners or detergents or shiny products that may leave a dull layer on your vinyl floors.
• Avoid using bristled brooms, vacuums with beater bars as it can visibly damage the floor surface.
• Avoid using harsh abrasive scrubbing tools.

Prevent Damage-

After immediate installation of vinyl flooring, do not place furniture on the floor for at least 24 to 48 hrs. Put mats in planned locations all overyour home to catch spills and dirt. Make sure not to place mats with rubber or latex backing, as they can permanently scratch luxury vinyl flooring. Use floor protectors to protect your luxury vinyl from scuffs and tears, this is to avoid permanent damage to your vinyl flooring.

Ultimately, caring for vinyl flooring is equally important as making the choice of its installation at your property. With proper care and maintenance, it can endure some of the messiest and busiest activities in your home.

The post How to Protect Vinyl Flooring? appeared first on Express Flooring.

Granite floors have a very royal look. When an entryway or a hallway or even a kitchen countertop has granite tiles, it gives a very elegantly chic look. Granite tiles are an investment to give your home a luxurious look. Granite is strong, heat resistant and can take heavy wear and tear.

Granite tiles are considered to be slightly more expensive than other flooring types. They can be installed in any room, like the bathroom, kitchen, hallway etc. Given the price you pay, granite needs regular cleaning to keep up its look and they need constant attention.

Tips on how to clean your granite floors on a regular basis:

• Have to dry mop your granite floors on a daily basis, to keep the dust and dirt from accumulating on the tile.
• Never use abrasive cleaners or bleach.
• Make sure to use cleaners that are recommended.
• Clean up any spills immediately to prevent staining. You can use a paper towel or a soft cloth.
• Always use warm water and soft cloth. After cleaning wipe clean with a dry cloth.
• Try to use distilled water as you can be rest assured that there is no mix of chlorine or other minerals.
• Do not use rough sponges or scrubbers for cleaning. They can leave permanent scratch marks.
• Red wine, coffee or soda can be dangerous if left for too long on your granite floor or counter tops. They can make your tiles look very drab.
• If the spill is not cleaned by using water, you can try using a little soap mixed in water and clean the area with a soft cloth.
• If the stain is still persistent you can make a paste with baking soda and water and apply it on the stain. Leave it overnight and then clean it.
• If the color of the granite is light color then you can use hydrogen peroxide to clean the stains and if the granite is dark color then you must use acetone as a cleaning agent.

How to polish your granite with home-made remedies to keep the well maintained look:

• Mix ¼ cup of baking soda and 3 cups of water. Apply it and wipe it clean. Take a soft cloth and polish your floors to give it a new look.
• Mix 1 cup of rubbing alcohol and 3 cups of water with a few drops of soap (ph balanced). Apply it, clean it and polish with a soft cloth.

Maintaining your granite floors on a regular basis is very important. In the same way, it is also recommended that once every year, the sealant is applied to the granite tiles or counter-tops, to give its glossy shine back and also to protect it.

Besides all this, regular checks need to be done to your granite tiles and counter-tops to check and see if there are any cracks or chips. If there are any, it is highly recommended to replace it immediately and not wait for the tile to crack. Check to see if grout is intact and not falling out.

Ask the Flooring Experts:

How to Clean Different Types of Flooring

How to Care For Granite Tile Floors

How to Clean Shower Tile Grout? Homemade Tips

How to Install Porcelain Tile in Bathrooms

Step By Step Procedure To Install Tile Flooring

More “Tile” Articles >

The post How to Care For Granite Tile Floors appeared first on Express Flooring.

Vinyl flooring has become the most admired flooring option in recent times. It is also used in kitchens and bathrooms as it is waterproof and is easy to clean. When taking the price in consideration, it is much less and it gives a very comfortable and a warm feel when walked on. Vinyl flooring can look great and maintain its unique shine by taking necessary care by cleaning it regularly.

How to Clean Vinyl Flooring?

To keep your vinyl flooring clean and be able to maintain the look, we suggest you follow the below instructions of Do’s and Don’ts:

DO’S:

• Always keep your floors free from dirt and dust.
• Vacuum regularly
• Before wet mopping make sure to sweep with a broom to remove hair, dirt and dust.
• Place door mats near entryways to stop dirt from getting in
• When moving heavy furniture across the room, make sure to place a rug underneath to avoid scratches on your floor.
• Make sure you place felt pads under the furniture legs to prevent dents on your floor.
• The best way to clean vinyl flooring is to use plain warm water and mop the place.
• If spills occur, clean up immediately
• Best way to deep clean vinyl floors is by using vinegar. Vinegar helps to remove the grit and dirt. After mopping, it doesn’t leave a soapy affect to the floor.
• If the floor is very dirty, try adding a few drops of dish wash liquid to the mixture of vinegar and warm water, and mop the place again.
• Can add a few drops of baby oil to the mix of vinegar and water to give your floor a shine.
• Does you floor have stubborn scratch marks, take jojoba oil on a cloth and wipe the area till the marks disappear. Then clean the place with vinegar and water.
• Mix baking soda and water in to a paste and rub the stains caused by ketchup, mustard sauce, juices or any other stains caused by food. Rub it till the stain disappears and wipe the area with a damp cloth.
• Stains caused by ink, dye or cosmetics can be removed using alcohol and a soft brush.
• Crayon marks everywhere?? Use mineral spirits to clean up
• Use mineral spirits to clean up stains caused by paint or sketch pens
• Use nail polish remover to remove stains caused by nail polish.

Don’ts:

• When vacuuming vinyl floors never use the power nozzle, this can harm the floor.
• Do not use rough scrubbers or steel scrubbers on your floors
• Never use polishes or wax
• Never use detergents; they can be very harsh on the floor.
• Do not use ammonia based cleaning solutions as this can cause your floor to crack.

With just a little time, energy and the proper know-how, you can keep your vinyl floors clean and shiny for years to come.

The post Vinyl Floor Cleaning and Care appeared first on Express Flooring.

Many people consider that removing chewing gum from Laminate floors is a difficult one but it is not that painful task as you think. But if you notice that gum has accidentally stuck to the floor, remove immediately before it does major damage to the floor. However, below are the few simple steps which help you to remove the gum from laminate.

Things Needed:

• Plastic bag with ice cubes or Ice packs
• Wood cleaner
• Butter knife
• Blade

Follow these simple tips to remove gum to make your floor look clean again.

With the use of butter knife:

• To remove the chewing gum from floor, use a butter knife to scrape the gum off from the Laminate.
• Some experts or professionals can also make use of blade to remove gum from the floor but it requires a lot of care and expertise.
• If you are trying to do it yourself, you must be very careful when removing gum with knife as you may scratch the floor instead.
• Removing gum with knife requires more time, but this process is less risky.

With Ice:

• Take a pack of ice cubes and place it exactly on the sticky spot. Allow the ice bag to sit on the affected area at least for 10 minutes or more.
• You can even take a plastic ice bag, if the bag leaks place a paper towel or cloth between the bag and gum.
• With ice the gum will become hard and it can be removed off from the floor very easily.
• After the chewing gum has hardened, you can peel it from the floor by using butter knife or with hand.
• If you still find it difficult to peel the gum, again replace the ice bag for a couple of minutes and then try again to remove the gum.

Scraping Excess or harden Gum with Plastic knife:

• It cannot be removed so easily, if the gum sticks harder and is in a long flat strip on the floor.
• Remember not to use a sand paper. Because, sandpaper can spoil the laminate finish and you will be permanently left with a spoiled area of flooring instead of a small spot of gum stain.
• Choose a good flat plastic scraper and gently place it down the gum, where it meets the floor and then remove it from the floor.
• You can use the back end of a plastic fork or spoon , plastic knife, or even a plastic paint scraper to remove the gum

Points to be Remembered after removing the Gum:

• After removing the gum from floor, you need to clean the leftover residues.
• Spray the spotted area with any cleaning liquids and allow it to stay on the floor for some time and clean it with a wet mop.
• Sometimes accidentally you may scratch the laminate floor. Even if this happens, do not worry about it, as you can fix the holes easily with the use of wood filler.
• Finally as a last step, wipe off the spot and dry it with a soft cloth.

Ask the Flooring Experts:

How to Clean Different Types of Flooring

How to Remove Chewing Gum from A Laminate Floor

How to Remove Glue from Laminate Flooring? [Quick Tips]

How to Remove Rug Pad Marks From Your Floors (Updated)

The benefits of Mannington laminate flooring [Updated]

More “Laminate” Articles >

The post How to Remove Chewing Gum from A Laminate Floor appeared first on Express Flooring.